Surface Roughness Tester SRT-6200

详情

1.FEATURES
This instrument is compatible with four standards of
 ISO, DIN, ANSI and JIS and is widely used in production
 site to measure surface roughness of various
machinery-processed parts, calculate corresponding
 parameters according to selected measuring conditions
and clearly display all measurement parameters.
When measuring the roughness of a surface, the
sensor is placed on the surface and then uniformly
slides along the surface by driving the mechanism
inside the tester. The sensor gets the surface roughness
 by the sharp built-in probe. This roughness causes
displacement of the probe which results in change of
inductive amount of induction coils so as to generate
analogue signal, which is in proportion to the surface
roughness at output end of phase-sensitive rectifier.
The exclusive DSP processes and calculates and then
outputs the measurement results on LCD.
* Very easy to operate
* Multiple parameter measurement: Ra, Rz
* Highly sophisticated inductance sensor
* Built-in lithium ion rechargeable battery and control
   circuit with high capacity
* Small in size, light in weight and easy to use
* Can communicate with PC computer for statistics,
   printing and analysing by the optional cable and the
   software for RS**2C interface.
*Manual or automatic shut down. The tester can be 
   switched off  by pressing  the Power key at any time.
   On the other hand, the tester will power itself off
   about 5 minutes after the last  key operation.
2．SPECIFICATIONS
Display： 4 digits, *0 mm LCD, with blue backlight
Parameters:  Ra, Rz
Display  Range
           Ra:   0.****0.*0um/1.******0.0uinch
           Rz:   0.******0.0um/0.*******0uinch
Accuracy: Not more than *0%
Fluctuation of display value: Not more than 6%
Sensor :
         Test Principle: Inductance type
         Radius of Probe Pin: *0um
         Material of Probe Pin: Diamond
         Measurement Force of Probe: *6mN(1.6gf)
         Probe Angle: *0°
         Vertical Radius of Guiding Head: *8mm
Maximum driving stroke:  *7.5mm/0.7inch
Cutoff length (l): 0.*5mm / 0.8mm / 2.5mm  optional
Evaluation length:  1~5 cut off  optional
Driving speed:
         sampling length = 0.*5mm   Vt=0.**5mm/s
         sampling length = 0.8mm    Vt=0.5mm/s
         sampling length = 2.5mm    Vt=1mm/s
         returning                                Vt=1mm/s
Resolution : 0.**1μm    if reading ＜*0μm
                      0.*1μm    if *0μm≤reading＜**0μm
                      0.1μm    if reading ≥**0μm                              
Power Li-ion battery: rechargeable
Operating conditions:  Temp. ***0℃
                                      Humidity <*0%
Size：**0x*7x*8 mm  (5.5x2.2x1.9 inch)    
Weight: about **0 g
Attachment:
Standard Sensor RP***0
Groove Stylus SRP***0
curvature Probe SRP***0
Extension Rod   SER***0
Mesurement Stand   SRS*1
Standard Sample Plate    SSP***0
Cable and Software for RS***2/USB
Bluetooth  interface