A performance and maximum temperature only on our XF ovens:
Primary
vacuum
Secondary vacuum
Heating
up to **0°C (**0/**0°C in option).
Final
vacuum of ***6 mBar, depending on the vacuum pump used.
Temperature time fluctuation: less than ±0,2°C.
A solid construction for lasting performance.
Four sizes
from *0 to **0 liters.
The
inner casing is made of corrosion resistant stainless steel, with
rounded corners.
The
outer casing is made of sheet steel, finished in a tough stoved
epoxy paint (colour light grey RAL***5).
No
contact between inner and outer casing and an optimised
insulation minimises heat dissipation.
The
walls are insulated with glasswool, low external temperatures and
excellent thermal stability.
The door
is a thick toughened glass plate.
The
insulation and the gasket are asbestos-free.
The C***0 Controller functions:
The PID digital controller FRANCE-ETUVES C***0 offers the following
functions:
Mesure de
temprature par sonde Pt**0 Ω.
Set and
actual temperature display.
Delayed
start: from 1mn to *9h*9 mn.
Heating
ramp: from 0,1 *0°C/mn.
Heating
timer: 0 *9h*9 mn.
Repeat
loop.
Buzzer
at the end of the cycle.
Overtemperature cut out.
An
independant overtemperature thermostat (class 3.1 protection) cut
out with an adjustable upper limit, to protect users, your products
and the oven.
Temperature control and safety:
Temperature sensor is a J thermocouple inside the chamber. The
temperature is controlled by a precise microprocessor
based-controller that provides a high accuracy and prevents the set
temperature from being exceeded.
The independent over temperature thermostat cut out has an
adjustable upper limit, giving a class 3.1
protection.
The auto tune PID digital controller digitally displays the set and
actual values of temperature, and incorporates a heater indicator
lamp.
The control panel houses an ON/OFF switch and a fault indicator
lamp which lights when the safety thermostat comes into
operation.
Pumps types:
As a standard, we propose to you double stage vane pumps of 4, 5,4,
9 or *7 m3/hour. The limit vacuum is 5.***3 mbar but can vary
according to the type of installation.
Other models and technologies of pumps are available on demand:
diaphragm dry vacuum pumps, Roots...
Equipment:
Multiple position shelving for convenient loading /
unloading.
Additionnal shelves are available.
