离岸价格
获取最新报价30500 ~ 35000 USD / Set ( Negotiable )
|1 Set Minimum Order
国家:
China
型号:
XKP
离岸价格:
30500 ~ 35000 USD / Set ( Negotiable ) 获取最新报价
位置:
China
最小订单价格:
30500 per Set
最小订单:
1 Set
包装细节:
standard exporting/plastic film and as customer's requirement
交货时间:
to be effected within 30 days after receipt of dep
供应能力:
35 Set per Month
付款方式:
T/T, L/C, Western Union
联系人 Ms. yali
Room 508 No. 139 Pujiang Road, Lingang New City, Wuxi, Jiangsu
Technical Data:
| Model | XKP***0 | XKP***0 | XKP***0 |
| Diameter of roller(mm) | **0 | **0 | **0 |
| Length of roller(mm) | **0 | **0 | **0 |
| Liner speed of front roller(m/min) | *8.*5 | *4.5 | *5.6 |
| Friction ratio of roller | *1:*1.3 | *1:*1.3 | *1:*1.3 |
| Input Size(cm ) | **8cm block | **8cm block | **8cm block |
| Output size | *0 to *0 mesh size (0.6 to 2mm) | *0 to *0 mesh size (0.6 to 2mm) | *0 to *0 mesh size (0.6 to 2mm) |
| Capacity(kg/h) | ******0 | ******0 | ***0 |
| Motor power(kw) | *5 | *5 | **0 |
| L*W*H(m) | 3.*5×1.8×1.*5 | 4.*5×2×1.*5 | 4.*5×2.3×2 |
| Weight(t) | 7.5 | *1 | *8.5 |
Main structure and characteristic
This is a double roll rubber-mixing machine. It consists of motor, gear-down reducer, driving gears, speed-ratio gears, front and back rolls, bearings, frame, cover, bed plate, adjusting pin device, emergency stop device, roll temperature adjusting device, lubricating device and material plate, etc.
Front and back rolls are parallel mounted in the bearing of frame. By means of reducer, driving gears, speed ratio gears, the motor drives the front and back rolls rotate toward each other so that rubber-cracking is begun. The rolls are made from chilled cast alloy iron; the inner of it is hollow. Steam and cooling water can pass through them so that the surface temperature can be adjusted. Its surface possesses higher hardness and fineness.
Roller bearing, copper bushing is fixed in the bearing base of frame. Back roll bearing bases are fixed up on frame, and the front roll-bearing base can slide in the guide-rail of frame.
Roll spacing adjusting is carried out by means of the reverse of hand wheel makes the thread rod drive front bearing base movement. The roll pin reduces when the hand wheel rotates clockwise, otherwise it will increase.
The emergency stopping device is mounted in the frame. In abnormal situation, pulling the rod, via dynamic, the machine is stopped immediately.
Adjusting temperature device is two spray pipes with numeral rows of holes, extend the two pipes into the hollow roll, the holes are in the position of working section of the roll. The position of holes slants to *0 degree inner direction so that the spraying water and steam is directed at contacting angle of sizing material, this can control the surface temperature of roll.
Remarks :The quality guarantee is *2 months after finishing the trial run of machines which has been shipped to the buyer side. If any part (excluding easily damaging parts) is found defective in quality within warranty period, we would like to replace it for free. After warranty, spare parts can be replaced based on favorable price.
The tire crushing line can crushing the whole tire into the powder or the grain.It consisted of steel puller,tire cutter,tire shredder,coarse crush,fine grinder and so on.Every line depends the capacity pe year want to reach,the material of the tire and crushing fineness of the finished materials output.
Tel:******************5
Phone:**************1
Skype: lious-luo
| 国家: | China |
| 型号: | XKP |
| 离岸价格: | 30500 ~ 35000 / Set ( Negotiable ) 获取最新报价 |
| 位置: | China |
| 最小订单价格: | 30500 per Set |
| 最小订单: | 1 Set |
| 包装细节: | standard exporting/plastic film and as customer's requirement |
| 交货时间: | to be effected within 30 days after receipt of dep |
| 供应能力: | 35 Set per Month |
| 付款方式: | T/T, L/C, Western Union |
| 產品組 : | waste tyre recycling machine |
