Y14H/F direct acting bellows pressure reducing valve

详情

Pressure Rating: 1.*- 2.5Mpa
Specification: DN****5
Material: CF8
Standard screwed: NPT BSP

Direct Acting Bellows Pressure Reducing Valve Structural characteristic and purpose:
This reducing valve is direct acting bellows pressure reducing valve, mainly composed of valve seat, valve flap (steel ball), corrugated tube combined component and spring. Set the outlet pressure through adjusting spring, the opening of valve flap enlarged when the outlet pressure reduced, the opening of valve flap decreased when the outlet pressure reached to the set pressure. The valve pressure of the medium acts on the area of corrugated tube and transduce to adjusting spring, realizing the function of pressure reducing and regulating. This reducing valve is designed in meet of the need of energy saving. It has the characteristics of multi-function and light. It is widely applied on water, steam, air, oxygen, liquefied gas pipe of factory and hotel. You can adjust the pressure by rotating the plastic hand wheel, no need to use tool, the connection and installation is very convenient. The internal structure use corrugated tube, the sealing face has filtering mesh protecting device, which protect the internal parts from damage, and greatly prolong the service life.
 

Direct Acting Bellows Pressure Reducing Valve main technical parameters and indexes of performance :
Nominal pressure: PN1.6Mpa
Tested pressure of shell: 2.4Mpa
Sealing test pressure :1.*6Mpa
Max. inlet pressure: 1.6Mpa
Pressure range of outlet: 0.***1.0Mpa
Min. differential pressure: 0.*5Mpa
Medium: Water, steam, liquid, air, oxygen, nitrogen, etc.
Operating temperature: **0

Direct Acting Bellows PRV material of main component :

Valve body, bottom cover: CF8
valve cover: casting aluminium alloy, CF8
valve flapValve rod, Valve seat: CF8
bellows: 1Cr*8Ni9Ti
MembraneHandwheel: Heat-resistant plastic
Spring of main valve: *0CrVA
Adjusting spring: *0Si2Mn