LY®S **0 is a kind of styrene-acrylic emulsion surface sizing
agent, used on paper and paper board’s surface sizing in variety
of papermaking conditions. Compared with AKD kind of surface
sizing agent, LY®S **0 almost has no problems such as maturation
period, which can effectively control the quality of the paper
sizing. Besides, LY®S **0 has a low tendency to foam, it can
increase the paper surface strength to a certain extent. This
product can partly replace internal sizing, purifying the wet
system.
APPLICATION
The common adding point of LY®S **0 is within surface sizing
system, the inlet of the starch transfer pump or being directly
added into the used bucket of sizing material. The typical
dosage is 2~5%(dry starch), which is roughly equivalent to
0.5~2.0 kg/t paper ton. Basically, it need aluminum sulfate to
help the sizing. It should be noticed that LY® S **0 can not be
directly added in the application of OBA, which to prevent the
failure of OBA.
PACKAGE
LY®S **0 is delivered in **0kg drum or ***0kg IBC containers.
The package specification may vary with different supplying
bases. Please consult with our company’s representatives for
further information about the specific package type.
STORAGE
The maximum storage time at *0 environment ℃is six months;
product is suitable for low-temperature as possible, but care
must be taken to avoid products frozen.