Corrosion Resistant Disc Springs

详情

Corrosion Resistant Disc Springs, made of stainless steel, such as SUS**1, SUS**2, SUS**6, ***4PH, ***7PH, ***7Mo, their resistant to corrosion is higher than general Disc Springs made of spring steel, so they also be known as "Stainless Steel Disc Springs". Stainless Steel Disc Springs are also widely used in National Defense, Metallurgy, Petrochemical, Wind Power, Engineering, Food Processing Equipment, etc. 
In addition to Stainless Steel Disc Springs , High Temperature Disc Springs, Cryogenic Disc Springs are suitable for high temperature or Cryogenic applications, you can choose according to the application requirement.
Corrosion Resistant Disc springs manufacturer are designed & manufactured according to DIN***2 & DIN***3, GB/T ********5, and ISO ****0. The engineers of HEGONG SPRING ® are pleased to design the springs for the specific applications together with the customers R&D department. Be free to contact with our engineers.
Cryogenic Disc Springs Material:
**1
SUS**1 is corrosion resistant material. The strength of such material is obtained by cold rolling, so maximum material thickness is 3mm. Cold rolling will also give the spring some magnetic properties. Situation for SUS**1 is soft, Half hard, 3/4 hardness, and full hard.
**4
SUS**4 is corrosion resistant material. The content of C% is lower than SUS**1, low hardness, non-magnetic, good elasticity, and good cold processing effect. Its Corrosion resistance is better than SUS**1. And maximum material thickness is 3mm.
**6
SUS**6 is corrosion resistant material. Because of Mo%, the corrosion resistance of SUS**6 is better than SUS**4. But tensile strength is lower than SUS**1 and SUS**4. Because of High Ni %, the corrosion and temperature resistance of SUS**6L is better than SUS**6. And maximum material thickness is 3mm.
***4PH
***4PH is a martensitic precipitation hardening stainless steel. Because the strength can be obtained by aging treatment, so its material thickness can reach 3mm and above. It can work under- **0 degrees.
 
***7PH
***7PH is austenitic-martensitic precipitation hardening stainless steel. The strength of such material is obtained by work hardening and precipitation hardening. Its Corrosion resistance is higher than ***4PH. And its material thickness can reach 3mm and above.
***7PH
***7PH is precipitation hardening stainless steel. Because of Mo%, its corrosion resistance is better than ***7PH. However, Corrosion resistance of such precipitation-hardening stainless steels, such as ***4PH, ***7PH, and ***7PH is worse than austenitic material such as SUS**1, **4, and **6. But its thickness can reach 3mm and above.
Surface Condition And Corrosion Protection:
Common surface treatment for Hegong Corrosion Resistant Disc Springs is Polish.
Tolerance:
Learn more about Tolerance
The Tolerance is according to DIN***3 standards
Specification:
HEGONG® Corrosion Resistant Disc Springs outer diameter from 6mm up to **0mm and thickness from 0.2mm up to *4mm;