HSQ series of speed reducer
mainly contains following parts:
1)interface bracket
2)rotator 3)stator
4)coil
5)mid joint flange (seeing fig.1)
The interface bracket (part
1)is to be casted presicely and mounted on the chassis or body.The
rotator(part 2)which are divided into two parts(front and back)are
to be casted with light and fine ferrous magnetic materials
containing good magnetic conductivity and it is specially made into
a form of blade wheel in order to dispel the heat caused by
braking. Two rotators are mounted on two sides of the stator in
symmetry through the mid joint flange (part 5),keeping with an
appropriate gap (adjusted by spacer). The stator (part 3)is a
stamping workpiece with the light and high strength material
containing features of magnetic proof.Around the outside circle of
the stator are mounted four sets of magnetic coils with unlike
poles,which are wounded on 8manmetic cores with high magnetic
conductivity.The coils (part 4)are to be winded with wires
containing the characters of high heat resistance and high electric
conductivity and be divided into four groups(each group has
two)with unlike poles.The mid joint flange (part 5)which is made of
fine material by presice machining, is to be connected with the
propeller shaft of the automobile
