Xiamen C & D Aluminium CO., Ltd

composite: 0.4-0.8 Si, 0.70 Fe max, 0.15-0.40 Cu, 0.15 Mn max, 0.80-1.20 Mg, 0.04-0.35 Cr, 0.25 Zn max, 0.15 T

Medical foil 0.012-0.026 350-1400 1235 1145 H18 75 150 400-800 For medicine packing or seal packing of medic

Alloy: AA1050, 1100, 3003, 3105 Width: 200-1250mm Thickness: 0.20-2.0mm Pattern: Diamond embossed, Stucco e

Alloy: 1xxx, 3xxx, 5xxx, 8xxx, etc Temper: H14, H16, H18, H24, O, F Thickness: 0.20-7.0mm Width: 200-1800mm

Products classify Products Name Specification Alloy Type Condition Inner diameter(mm) Rewound diameter(mm) P

Products classify Products Name Specification Alloy Type Condition Inner diameter(mm) Rewound diameter(mm) P

Products classify Products Name Specification Alloy Type Condition Inner diameter(mm) Rewound diameter(mm) P

Aluminium strips ALLOY: 1XXX, 3XXX, 5XXX, 8XXX Temper: O/H14/H16/H18/H24/H26 Thickness: 0.1-0.8mm Width: 2

Aluminium foil is the best protection available. Of all food wraps, it forms the strongest barrier against hea

Aluminium container foil (lubricated) Alloy/Temper: 3003, 8011/H24, 22/HO 45 micron to 150mic

Aluminium foil stock is used for producing foil. Alloy: AA8011, 8079, 1235 Temper: H14 Thickness: 0.25-0.35

Alloy: AA8011, Temper: H14 Thickness: 0.16-0.20mm thickness tolerance: +/-5% Width: Can be made according c

Use: It is taken as face plate and lining board after surface treatment or not to machining down aluminum pla

ALLOY: AA1100, 3003�¯�¼ï¿½8

Aluminium strips ALLOY: 1XXX, 3XXX, 5XXX, 8XXX Temper: O/H14/H16/H18/H24/H26 Thickness: 0.1-0.8mm Width: 2

Alloy: AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5754, 5083 Temper: O, H14, H16, H18, H24, F Thickness: 0.

Aluminium foil stock is used for producing foil. Alloy: AA8011, 8079, 1235 Temper: H14 Thickness: 0.25-0.35

Alloy: 1100, 1235, 3003, 8011, 8079 Temper: O, H16, H18, H24, H26 Thickness: 0.0055mm-0.20mm Width: under 1

Alloy: AA1050, 1060, 1100, 3003, 3105, 5052 Temper: H14/H16/H18 Thickness: 1.0-8.0mm Width: 800-1500mm Pat

Application: Cookware, Machine Parts Alloy & Temper AA1100 / 1070 / 1050 / 1145 / 1060 / 8011 / 3003 / 5

Use: It is taken as face plate and lining board after surface treatment or not to machining down aluminum pla

The products have good heat resistance and surface quality, and they are widely used in hot food packing.

Alloy: 1xxx, 3xxx, 5xxx, 8xxx, etc Temper: H14, H16, H18, H24, O, F Thickness: 0.20-7.0mm Width: 200-1800mm

SI: 99.0% min. Fe: 0.3% max Al: 0.15% max Ca: 0.05%max Ti: 0.02%max. Mn: 0.025% max.

ALLOY: 8011 TEMPER: SOFT THICKNESS: 80-100MIC WIDTH: CAN BE MADE ACCORDING TO CUSTOMER REQUIREMENT

Aluminium strips ALLOY: 1XXX, 3XXX, 5XXX, 8XXX Temper: O/H14/H16/H18/H24/H26 Thickness: 0.1-0.8mm Width: 2

Alloy: AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5754, 5083 Temper: O, H14, H16, H18, H24, F Thickness: 0.

Alloy: AA1050, 1060, 1100, 3003, 3105, 5052 Temper: H14/H16/H18 Thickness: 1.0-8.0mm Width: 800-1500mm Pat

The products have good heat resistance and surface quality, and they are widely used in hot food packing.

Alloy: 1xxx, 3xxx, 5xxx, 8xxx, etc Temper: H14, H16, H18, H24, O, F Thickness: 0.20-7.0mm Width: 200-1800mm

Alloy: 1100, 1235, 3003, 8011, 8079 Temper: O, H16, H18, H24, H26 Thickness: 0.0055mm-0.20mm Width: under 1

Alloy: AA1050, 1100, 3003, 3105 Width: 200-1250mm Thickness: 0.20-2.0mm Pattern: Diamond embossed, Stucco e

Application: Cookware, Machine Parts Alloy & Temper AA1100 / 1070 / 1050 / 1145 / 1060 / 8011 / 3003 / 5

Alloy & Temper :8011, H18 Thickness:0.02mm-0.25mm Width:400 -600mm multiple colours with VMCH coa

Aluminium foil is the best protection available. it forms the strongest barrier against heat, moisture, air an

Alloy: AA1050, 1100, 3003, 3105 Width: 200-1250mm Thickness: 0.20-2.0mm Pattern: Diamond embossed, Stucco e

ALUMINIUM CIGARETTE FOIL ALLOY: AA 1235 Temper: O THICKNESS: 6MIC-10MIC This material is used to laminate

Alloy: AA1050, 1060, 1100, 3003, 3004, 3105, 5052, 5754, 5083 Temper: O, H14, H16, H18, H24, F Thickness: 0.