SK VK Chemical Co., Ltd

HDPE Grade Product type Melt Flow Rate(g/10min) Density(g/cm3 Power Ash Tensile Strength MPa Elongat

Content 96min. 98% min 99% min. Na2CO3 1.4 max 1% max 0.9%max NaCl 2.8 max 0.6 max 0.15max Fe2O3 0.01

Items iron oxide red 130 iron oxide red 190 iron oxide black 780 iron oxide yellow 311 iron oxide ye

Apperance: white or yellowish-white, solid and liquid. Melting points: 54, 56, 58, 60, 62, 64 Specification:

Sodium Formate Molecular Formula: HCOONa Molecular Weight: 68 Product Introduction: This product is a

Formic Acid 85% Colour Index Platinum Cobalt----------------------------------------------10Max Purity -----

Sodium Metabisulphite 64% Tech Grade Sodium Metabisulphite (As SO2) -----------------------------------------

Stearic Acid - SP Single Pressed Colour White � Faintly Yellow Appearance Small Flakes Formula C17

Titanium DioxideRutile Type (Chlorination Process) Content -------------------------------------------------

Items iron oxide red 130 iron oxide red 190 iron oxide black 780 iron oxide yellow 311 iron oxide ye

Technical indexes: Specification: Active matter ---------------------------------------------------------

Zinc Oxide 99.5% Content (ZnO) ---------------------------------------------------------------99.5%Min MnO--

Oxalic Acid 99.6% Total Acidity -----------------------------------------------------------------99.6%Min As

Technical indexes: assay -------------------------------------------------------------------------- 96.0%m

ITEM Carbon Black N-220 Carbon Black N-330 Carbon Black N-550 Carbon Black N-660 Loding Absorption Number

Chrome Oxide Green Purity -------------------------------------------------------------------------------99.

Polyaluminium Chloride Manufacturing process Spray drier type Appearance Light yellow fine prowder

CMC for Detergent Type XD-1 XD-2 XD-3 XD-4 XD-5 Viscosity (2% aq. sol., 25�) mpa.s 5-4

Pentaerythritol 95% Mono-PE -----------------------------------------------------------------------95.0%Min