IIJ series fully automatic oil
tester is designed as per the requirement of IEC**6 Testing Method
of Insulation Oil Medium Strength, which via proper programming,
has got functions of auto boosting, step down, stirring, display
and print out. After breakdown of oil medium, HV break off will
operate within *0 seconds to enable an auto isolation of control
system partly; this effectively safeguards the personnel security
and equipment safety. The tester is suited for testing of the
strength of insulating oil medium, as well as for testing of
withstands voltage of transformer oil. Features : 1) Fully
automatic, control by microcomputer, utilization of new I/O
terminal. 2) Numbers of times of testing and idling time of
stirring are set via digital setting. 3) Test results displayed and
printed out automatically. 4) Strong capability of
anti-interference. 5) High accuracy of testing and high capacity of
anti-jamming. 6) Easy to operate, small size, light weight which
operated in the open air very conveniently and convenient for
maintenance 7) Can store *9 groups oil testing data which is
convenient to reading and print. The testing data can keep **0
years under the condition of power off. 8) System time can go on
running under power off.(the system time just for reference can not
be the standard of timing) Technology and parameter data 1.
Power supply: AC**0V *0%, *0 HZ 2. Voltage output: *0 KV, *0KV,
**0KV 3. Capacity: 1.6KVA, 2.0KVA 4. Pressure increase rate : About
2 KVA/S 5. Pressure testing speed: 3% 6. Break down sensitivity :
<2KV 7. Wave form distortion :≤3% 8. Time of break down: ≤*0ms
9. Operational environment: Temperature:0°C**0°C, Humidity:
the most relative humidity*5% *0. Storage environment :
Temperature:**0°C**0°C, Humidity: the most relative humidity*5%.
*1. Operational height: <**0m (can be specially designed if the
height is over ***0m) *2. Test cell: Glass, volume **0 to **0 ml,
with protective cover and stirrer. *3. Electrodes: Stainless steel
spherical *6 mm diameter/hemispherical *5 mm radius,
2.5 mm gap as per IEC***6. *4. Nitial
stand time of oil sample: **0 seconds Intermediate stand time of
oil sample: *0 seconds String time of oil sample: *0 seconds
Number of consecutive test: 6 *5.Weight:
*8kg
