详情
Load Management:
Load the resource information of the drive to the program,
including the drive series, model number and other parameters of
the drive.
Terminal mode:
Makes easy to monitor, view the status of the patient drive
and help to make a fast diagnose onto the drive and find out a
right solution. Besides you can perform HDD repair using HDD ATA
commands here.
Read FW:
Backup the firmware by modules and by UBA from target
drive.
Update FW:
Update the existing corrupted firmware with a donor one by
module and by UBA.
FW Diagnosis:
Scan and check the firmware modules of the target drive.
Defects operation:
Clear P-list, clear G-list, disable zone, defects to P-list,
surface scan, zerofill and other defects fixing features and
solutions are included.
NVRAM Operations:
Diagnosis and recover NVRAM, delay test, read/write NVRAM,
edit NVRAM and save modification, read ROM.
Heads Operation:
View head map, Head depop-Forward and Random head depop.
RAM Operation:
ROM read/write, you have to make sure there's BIOS chip on the
PCB, like the following pictures show (in red). If there is not a
BIOS chip on the PCB, it means the ROM has been embedded in the
main chip.
Other Features:
HDD configurations, check update, reset S.M.A.R.T. and
initialize S.M.A.R.T., initialize DDD, view sector tab, Motor
control, power control and other useful Hitachi HDD repair features
are included.
HD Doctor for Hitachi is one must-have HDD repair tool if you
are going to provide Hitachi HDD repair or data recovery
services.
