详情
Strip pickling line
Strip the pickling process is through the chemical methods to
remove rolling process and in the strip surface after rolling of
the formation of the oxide skin or oxide. At present, is widely
accepted push-pull type turbulence hydrochloric acid, hydrochloric
acid pickling wash with as a medium. Advanced pickling line
generally use shallow groove pickling, this kind of means can save
with acid consumption but also to better pickling effect, and the
underside pickling strip than ShenCao pickling effect is good. My
company can contract pickling line of all the equipment design,
manufacture, installation and debugging.
1. Continuous type pickling general used for more than *****0 tons
of steel strip annual pickling line, due to the need for
configuration welding machine, large live set, and stretching
straightener, so its features are: pickling high speed and high
output, investment;
2. Push-pull type pickling general for annual output of *****0 tons
of steel strip below pickling line, because the equipment
configuration, so without its features are: small investment, quick
effect, but its production speed and yield no successive high. And
it can deal with the range of products to more than successive
production line, high flexibility, cost is low, and convenient
operation of the production line.
With annual output of *****0 tons of push type pickling line as an
example
Production *****0 tons/year strip thickness 1.5 ~ 4.5
mm
**0 m/min
maximum linear velocity strip width **0 ~ ***0 mm
Wear take speed *0 ~ *0 m/min raw materialφ**0
mm
diameter
Material kinds, sheet (SPCC SPCD, ALφ**0
mm
diameter SPCE products
The yield strength of **0 ~ **0 N/steel coil diameter was the
Max.φ***0
mm
Tensile strength of **0 ~ **0 N/steel coil was the single heavy
Max. *5 t
