离岸价格
获取最新报价|
1 Set Minimum Order
国家:
China
型号:
-
离岸价格:
位置:
China
最小订单价格:
-
最小订单:
1 Set
包装细节:
-
交货时间:
-
供应能力:
-
付款方式:
T/T, L/C
產品組 :
联系人 Alice
No.6, Jinhai Road,Shuangfeng Economic Development Zone,Hefei, Hefei, Anhui
Thermal recycling extraction units applies to the extraction,
concentration, diacolation, extraction of naphtha, reclaim of the
alcohol of the heat sensitive materials. For instance, the
traditional process in lines of plants, animals, Chinese
traditional medicine, food additive, etc,
in which the material is extracted first and condensed later, is
changed to the way of extract and condense at the same time. Also,
the whole unit can meet the needs of several kinds of extract
requirements such as negative, normal and positive pressure, in
which the water or alcohol distill process can be
applied.
Input the Chinese traditional medicine being
shredded, prepared, mixed according to prescription into the
extraction tank and add the solvent (the kinds of solvent and
quantity added should be subjected to the process), of which the
quantity is five to ten times that of the medicine, then
after marinating it for some time, open the steam valve to heat
with the sheaf heating up normally. And after heating up the
straight steam (only applied for water and aromatic oil distilling)
for a set time of steam and distill, take the distilling liquid
with high-temperature continuously from the bottom of distill tank
to the duplicate filter (with regard to the medicine with high
level filtering requirement, centrifugal filtration and high speed
separation should be taken into use) by coarse filtering through
the filter between each other, and then into the condense tank to
make the condensate formed. And then transport the condensate
through liquid collected tank continuously back to the distill tank
by pump. After that, the steam generated from the distill tank
enters into the heaters thermal resource of evaporator. On heat
exchanging in the heater, the condensate enters into the liquid
collected tank while the remaining steam also comes into it, which
is formed as condensate transporting back to the liquid collected
tank, and then the condensate in the tank is taken back into the
distill tank by pump as new solvent. All the steam generated by
impregnant in this way are formed as condensate by heat exchanging
and transported back into the distill tank, and then we can make
full use of the indirect steam in the condense process when
distilling the liquid. Right in this way, the equipment has perfect
performance in the aspects of energy conservation and impregnant
balance keeping.
1. Production time shortens as much as *0%. Several
times of distill and then condense for the traditional process, but
in this process, both the distill and condense processes are
centralized in a unit to develop at the same time, of which the
time needs 4 to 6hours only at one time.
2. Steam saves as much as above *0%, take the
secondary steam generated from the extraction tank as heat resource
of the concentrator and feed the chemicals with high temperature
into concentrator, for the purpose of least thermal losses.
3. Feeding quantity of impregnant saves as much as
*0%. Feed the impregnant for the medicine in the distill tank just
for one time to be used circularly in the seal unit. Then the
impregnant in the medicals and dregs shall be recycled on the whole
(with less than 5 percent of attrition rate), for the purpose of
less quantity, small consumption and great decreases of production
costs.
4. Medical obtains *0 to *0 percent more than that of
traditional process. And for the reason that the impregnant fed at
one time can be cycled in big circumfluence to make sure keep the
solute concentration in the medical materials and impregnant high
grads, the components content of medicinal materials geminates. As
a result, we can make great preparation for the quantitative and
qualitative measurements of medicine by dissolving the solute
quickly from the medicine with the increasing high yield of
medicine and its effective constituent.
5. Multi-function for one unit (distill, condense singly and
distill while condense), with compact structure and convenient
operation. One person could operate the unit, the floor area of
which is very little to save the space for the middle tank and the
sharing heater with little capital costs as a whole.
6. The whole unit select excellent stainless steel with
full-sealing channelization for the purpose of decreasing the
environmental pollution, canceling the infiltration of heavy metal
and bacteria to meet the need of GMP completely.
7. Since this device runs in the conditions of negative pressure,
the extraction temperature can be adjusted randomly between *0 and
*0 degree, which may play a good role in the extraction of medicine
with the heat sensitivity and polymerization, for the reason that
unit is working in negative pressure.
8. The condenser is designed with military technology and especial
structure, the heat exchange efficiency of which are 2 or 3 times
of conventional products in the markets.
9. All the secondary steam are finally transported back to the
extraction tank as new impregnant in the progress of unit, which
can prevent from losses even if materials escape during the
condense process.
Please contact us at:
Ms.Alice Wang
Anhui OECH Mechanical Equipment Co.,Ltd.
Tel: ***************3
Fax: ***************1
Mobile: ***************4
E-mail: O E C H M A C H I N E (at) 1 6 3 . C O M
MSN: O E C H M A C H I N E (at) H O T M A I L . C O M
国家: | China |
型号: | - |
离岸价格: | 获取最新报价 |
位置: | China |
最小订单价格: | - |
最小订单: | 1 Set |
包装细节: | - |
交货时间: | - |
供应能力: | - |
付款方式: | T/T, L/C |
產品組 : | pharmacy machines |