600mL Structural PU Sealant Adhesive By Cohestar Chemical Industry Materials Co., Ltd.,

600mL Structural PU Sealant Adhesive

离岸价格

获取最新报价

2.64 ~ 3.55 / Piece ( Negotiable )

3000 Piece Minimum Order

国家:

China

型号:

B61

离岸价格:

2.64 ~ 3.55 / Piece ( Negotiable )（面議）获取最新报价

位置:

China

最小订单价格:

2.64 per Piece

最小订单:

3000 Piece

包装细节:

600ml sausage/piece, 20 pieces/carton

交货时间:

15 days

供应能力:

2 Ton per Day

付款方式:

T/T, L/C

產品組 :

Sealant

产品规格

Classification: Other Adhesives
Main Raw Material: Polyurethane
Usage: Construction
Brand Name: COHESTAR

Main material:Polyurethane
Color:Black, grey
Appearance:Paste
Packing:600ml sausage
Extrusion Rate:Above 80 mL/min
Elastic recovery rate:Above 70%

详情

Description
It is one component, fast-curing, low-modulus polyurethane sealant. The sealant is black creamy and applied by extruded. It will not sag after filling the vertical joints and top seam. The curing layer is elastic and bonding well with metal, rubber, wood, glass and cement concrete.

Features
1. Good bonding strength with all building materials such as bricks, glazed tile, metal, wood and cement concrete.
2. Room temperature curing, non-toxic and no pollution.
3. Good wear resistance, tear resistance and anti-puncture.
4. Excellent resistance to aging and weathering.
5. Cures to a durable, flexible consistency.
6. Ready to use and save construction time.
7. Paintable on sealing surface.

Where to Use

Connection of building materials and sealing of construction joints.

Sealing of roof and underground waterproofing membrane.
Window, door and various curtain wall joints.
Building expansion joints and moving joints of bridge, tunnel, culverts and water conservancy projects.
Sealing of roof and drains.
Joints sealing of cement concrete road, bridge and airport runway.

Technical Data

Property		Data
		*5LM	*0LM
Flowability	Sag	≤ 3mm
Tack free time		≤ *4h
Extrusion Rate		≥ *0 mL/min
Elastic recovery rate		≥ *0%
Tensile modulus	*3℃	> 0.4Mpa	≤ 0.4Mpa
	**0℃	> 0.6Mpa	≤ 0.6Mpa
Mass loss rate		≤ 7%

Application
1. Substrate Preparation
Joints to be sealed or substrate to be bonded should be sound, clean, dry and free of oil and grease. Curing compound residues and other foreign matters must be thoroughly removed.

Priming

Priming is an extra step and depends on substrate and final end use. It can improve the corrosion resistance of certain metals as well as the durability of the bond when exposed to high humidity conditions. For most applications, high strength bonds on metal can be achieved without priming. It is suggested to pre-testing for adhesion to determine if a primer is needed.

Joint Treatment

It should be applied into joints when joint slot is at mid-point of its designed expansion and contraction. Place nozzle of gun into bottom of the joint filling entire joint. Keep nozzle in the sealant, and continue on with a steady flow of sealant preceding the nozzle to avoid air entrapment. Avoid overlapping of sealant to eliminate entrapment of air.

Attentions

Avoid contact with alcohol or other solvent materials during curing.
Do not apply sealant when moisture-vapor transmission condition exists from the substrate, as it can cause bubbles within sealant.
Use unpacked sausages the same day.
Do not use in contact with bituminous materials.

Package
**0ml sausage

Storage & Shelf Life
It must be stored in original and undamaged packaging in a clean, dry, protected location between *5℃**5℃.
Shelf life is *2 months.

国家:	China
型号:	B61
离岸价格:	2.64 ~ 3.55 / Piece ( Negotiable ) （面議）获取最新报价
位置:	China
最小订单价格:	2.64 per Piece
最小订单:	3000 Piece
包装细节:	600ml sausage/piece, 20 pieces/carton
交货时间:	15 days
供应能力:	2 Ton per Day
付款方式:	T/T, L/C
產品組 :	Sealant